Introduction
Characteristics
1. Unique bullet shape can make full contact with skin
2. Bullet shape, strong needle body, not easy to break the needle, carry more hyaluronic acid, wide contact with skin, high absorption efficiency
3. Small patch with large capacity
4. Each patch carries hundreds of microcrystals with high hyaluronic acid content
5. Only effective ingredients are added, no burden on the skin
6. The main ingredient is hyaluronic acid, which is quickly absorbed without any preservatives. The ingredients are simplified and the formula is safe and effective.
7. It can improve the skin's absorption rate of cosmetic active ingredients
8. Soluble microcrystals can create micron-level transmission channels on the skin, enhance the skin’s permeability to active ingredients, especially macromolecules, and achieve efficient transdermal absorption.
Anti-aging principle of dissolving microcrystalline eye patch
Using low-temperature rapid prototyping technology, the active ingredients (hyaluronic acid, etc.) are made into micron-sized soluble microcrystals and attached to the surface of the adhesive patch. The needle-like structure of the soluble microcrystals physically penetrates the keratin of the skin by applying pressure, which releases the active ingredients directly to the bottom of the skin epidermis.
Soluble microcrystals can stimulate skin collagen production, replenish skin loss of hyaluronic acid, regulate skin water balance, re-stimulate collagen synthesis, repair loose and aging skin, and make skin firm, plump and smooth.
Specification of Microneedle Eye Patch
Specification |
|
Item: |
Dissolving Microneedle Eye Patch |
Ingredients: |
Water, Hyaluronic Acid, Sodium Hyaluronate Cross Polymer |
Size: |
2 patches in 1 pack |
Patch Material: |
Hydrocolloid |
Benefits: |
Remove fine lines, smooth dry lines, reduce crow's feet |
Anti-ageing ingredients: small, medium and large compound hyaluronic acid, deeply replenishes the loss of hyaluronic acid in the skin, and diminishes large wrinkles on the eyes |
|
|
|
Instructions |
1. Clean the face and keep it dry |
2. Keep your hands dry, take out one microneedle patch, and tear off the sheet as shown in the picture |
|
3. Tear off the patch, and avoid to touching the microneedle part |
|
4. Gently apply the microcrystalline patch on the desired position, apply strength and press vertically (a slight pain will occur during the pressing process). Please do not paste repeatedly |
|
5. Apply for more than 90 minutes. It also can be applied before going to bed |
|
6. After removing the patch, follow the general steps to use skin care products |